[Q&A] Helmet off?

Munsie Post time 2017-01-11 18:44:33 |
How can you take the Mu helmet off to access the pins? I am looking for a non-screwdriver technique that will not scratch the pretty platic of the Mu.

Use magic Report

xiaomu Post time 2017-01-12 02:57:18 |
Hi Munsie,

Mu helmet (the top orange part) can be taken off without any tool. But if you would like to access the pins, you need a screwdriver.

I recommend you order our PCB board kit (

Thank you
Reply Support Not support

Use magic Report

 Author| Munsie Post time 2017-01-23 06:19:03 |
Hi XiaoMu,

I managed to slide off the Mu helmet, it was not strongly attached or hooked behind anything.

Thanks for the link to the PCB board kit. I have the Mu developer kit and managed to solder four pins on each side.

Thank you!
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules





Copyright © 2018 Morpx All rights reserved 浙ICP备14027877号
Quick Reply To Top Return to the list